1. Vacuum frequently and thoroughly. Most of the wear of carpeting is caused by dirt. Oily soils attract more oily soil and frequent vacuuming will reduce soil buildup.
  2. Get at spots quickly, 99% of all spots can be removed by one cleaning agent or another if they are cleaned in the first few days. The longer a spot chemically reacts with the carpet, the harder it will be to remove it.
  3. Test carpet before scrubbing, extracting or spotting. All carpets are different. Some carpets are very sensitive to acid type cleaners and will lose their color quickly. Other carpet dyes are sensitive to harsh alkalis.
  4. Use appropriate spotters starting with the mildest. Do not use harsh spotting agents unless absolutely necessary and always neutralize high alkaline or high acid cleaners after use.
  5. Never dig or brush spots. The proper procedure is to scrape the spot towards the middle and then tamp the spot into the white towel or cloth using a brush or other tamping devices. A meat tenderizer makes a great tamping tool.
  6. Do not overuse detergents, shampoos or spotters. Too much detergent will result in residual left in the carpet that even thorough vacuuming may not re- move.
  7. Do not overwet carpet. Our carpet detergents are chemically active enough so they do not need a tremendous amount of wetting. Over-wetting can cause brownout, carpet shrinkage, adhesion problems and all other kinds of night- mares.
  8. Extract residual if possible. Rotary scrubbing will clean the carpet fibers the best by encapsulating dirt and detergent residue, which powders off the carpet. Periodic extraction will flush out this dirt and other organisms deep in the car- pet.
  9. Never “coat” a dirty or spotty carpet. After scrubbing or extracting a dirty car- pet, if you are not satisfied with the results, do not apply a coat of carpet pro- tector as this will result in “gluing in the dirt” making it harder to remove it the next time. Either re-scrub or extract the carpet or leave the carpet un- til the next cleaning cycle before you coat.
  10. Vacuum frequently and thoroughly. It is so important it deserves two recommendations. Vacuum frequently and thoroughly.